Tile Spacers – What Size Should I Use? How Many Will I Need?
Why use tile spacers?https://fyne.in/m/kajaria
Tile spacers can aid in giving your job a professional finish (as well as providing a variety of style/design options for your customer) and come in a range of shapes and sizes.
Tile spacers allow you to achieve a consistent pattern when fixing wall/floor tiles and help to ensure that all tiles are laid equidistant from each other (providing a symmetrical finish – as you or your customer would expect) in order for the grout to then be applied.
What size tile spacers should I use?
Selecting the size of spacer required for a job is often down to personal preference (however there are British Standards to consider). As such it is recommended that you get the customers opinion on what they would prefer (as the spacers will dictate the width of the grout lines, which are a strong feature of the overall floor/wall design). As long as the job is completed in a way that will be long lasting (i.e. allowing for the movement of tiles for stress relief – 2mm is usually sufficient for walls and 3mm for floors) then the aesthetic side can usually be left to the customer.
Taking British Standards into consideration (as well as common practice) it is recommended that wall spacers are 2-3mm (with 2mm covering the majority of requirements) and floor spacers 3-5mm.
How to use tile spacers: pre-testing
Use spacers to do a trial run for your design (this will help finalise your design and ensure that you have a clearer picture of what the outcome will look like). It is recommended that you lay this trial run in the centre of the room and then visualise the complete design from different points in the room.
It would also be wise to take into account any unusual areas you will need to tile (such as around sinks or showers) and see how they will affect the overall design.
Tile spacing hints & tips
- For a smaller room use smaller spacers, this will allow you to utilise more tiles in the area, giving the impression of a larger space (again this is down to preference and should be discussed with the customer beforehand).
- Not all rooms are completely square and even then, not all walls are always equidistant at any two points (these can differ between mm to inches in some cases) – if the discrepancy could be considered an issue, it may be better to use larger spacing to attempt to minimise its impact on the overall job.
- Planning is important – don’t just go for the first option, sample a few different placements and see which works best for the room. Some size rooms may look better with wider spacing where as others may suit narrow spacing (there really is no right or wrong answer and as always discuss this with your customer beforehand).
- Spacing your tiles an extra mm apart can often save the majority of small cuts (across the total length of a wall/floor this can make a big difference!).
- It is not recommended to go below 2mm for wall tiles and 3mm for floor tiles due to the requirement of stress relief. All walls and floors are subject to movement (due to climate condition changes etc) and without an element of stress relief tiles will either crack or buckle.
- Using a chalk line or laser level when laying tiles and spacers can help maintain a straight line across a floor for even greater precision.